|
| Error codes |
| |
600 | An operation is pending. |
601 | The port handle is invalid. |
602 | The port is already open. |
603 | Caller's buffer is too small. |
604 | Wrong information specified. |
605 | Cannot set port information. |
606 | The port is not connected. |
607 | The event is invalid. |
608 | The device does not exist. |
609 | The device type does not exist. |
610 | The buffer is invalid. |
611 | The route is not available. |
612 | The route is not allocated. |
613 | Invalid compression specified |
614 | Out of buffers. |
615 | The port was not found. |
616 | An asynchronous request is pending. |
617 | The port or device is already disconnecting. |
618 | The port is not open |
619 | The port is disconnected. |
620 | There are no endpoints |
621 | Cannot open the phone book file. |
622 | Cannot load the phone book file. |
623 | Cannot find the phone book entry. |
624 | Cannot write the phone book file. |
625 | Invalid information found in the phone book. |
626 | Cannot load a string. |
627 | Cannot find key. |
628 | The port was disconnected. |
629 | The port was disconnected by the remote machine. |
630 | The port was disconnected due to hardware failure. |
631 | The port was disconnected by the user. |
632 | The structure size is incorrect. |
633 | The port is already in use or is not configured for Remote Access dialout. |
634 | Cannot register your computer on the remote network. |
635 | Unknown error. |
636 | The wrong device is attached to the port. |
637 | The string could not be converted. |
638 | The request has timed out. |
639 | No asynchronous net available. |
640 | A NetBIOS error has occurred. |
641 | The server cannot allocate NetBIOS resources needed to support the client. |
642 | One of your NetBIOS names is already registered on the remote network. |
643 | A network adapter at the server failed. |
644 | You will not receive network message popups. |
645 | Internal authentication error. |
646 | The account is not permitted to log on at this time of day. |
647 | The account is disabled. |
648 | The password has expired. |
649 | The account does not have Remote Access permission. |
650 | The Remote Access server is not responding. |
651 | Your modem (or other connecting device) has reported an error. |
652 | Unrecognized response from the device. |
653 | A macro required by the device was not found in the device .INF file section. |
654 | A command or response in the device .INF file section refers to an undefined macro |
655 | The macro was not found in the device .INF file section. |
656 | The macro in the device .INF file section contains an undefined macro |
657 | The device .INF file could not be opened. |
658 | The device name in the device .INF or media .INI file is too long. |
659 | The media .INI file refers to an unknown device name. |
660 | The device .INF file contains no responses for the command. |
661 | The device .INF file is missing a command. |
662 | Attempted to set a macro not listed in device .INF file section. |
663 | The media .INI file refers to an unknown device type. |
664 | Cannot allocate memory. |
665 | The port is not configured for Remote Access. |
666 | Your modem (or other connecting device) is not functioning. |
667 | Cannot read the media .INI file. |
668 | The connection dropped. |
669 | The usage parameter in the media .INI file is invalid. |
670 | Cannot read the section name from the media .INI file. |
671 | Cannot read the device type from the media .INI file. |
672 | Cannot read the device name from the media .INI file. |
673 | Cannot read the usage from the media .INI file. |
674 | Cannot read the maximum connection BPS rate from the media .INI file. |
675 | Cannot read the maximum carrier BPS rate from the media .INI file. |
676 | The line is busy. |
677 | A person answered instead of a modem. |
678 | There is no answer. |
679 | Cannot detect carrier. |
680 | There is no dial tone. |
681 | General error reported by device. |
682 | ERROR WRITING SECTIONNAME |
683 | ERROR WRITING DEVICETYPE |
684 | ERROR WRITING DEVICENAME |
685 | ERROR WRITING MAXCONNECTBPS |
686 | ERROR WRITING MAXCARRIERBPS |
687 | ERROR WRITING USAGE |
688 | ERROR WRITING DEFAULTOFF 689 ERROR READING DEFAULTOFF |
690 | ERROR EMPTY INI FILE |
691 | Access denied because username and/or password is invalid on the domain. |
692 | Hardware failure in port or attached device. |
693 | ERROR NOT BINARY MACRO |
694 | ERROR DCB NOT FOUND |
695 | ERROR STATE MACHINES NOT STARTED |
696 | ERROR STATE MACHINES ALREADY STARTED |
697 | ERROR PARTIAL RESPONSE LOOPING |
698 | A response keyname in the device .INF file is not in the expected format. |
699 | The device response caused buffer overflow |
700 | The expanded command in the device .INF file is too long. |
701 | The device moved to a BPS rate not supported by the COM driver. |
702 | Device response received when none expected. |
703 | ERROR INTERACTIVE MODE |
704 | ERROR BAD CALLBACK NUMBER |
705 | ERROR INVALID AUTH STATE |
706 | ERROR WRITING INITBPS |
707 | X.25 diagnostic indication. |
708 | The account has expired. |
709 | Error changing password on domain. |
710 | Serial overrun errors were detected while communicating with your modem. |
711 | RasMan initialization failure. Check the event log. |
712 | Biplex port is initializing. Wait a few seconds and redial. |
713 | No active ISDN lines are available. |
714 | Not enough ISDN channels are available to make the call. |
715 | Too many errors occurred because of poor phone line quality. |
716 | The Remote Access IP configuration is unusable. |
717 | No IP addresses are available in the static pool of Remote Access IP addresses. |
718 | PPP timeout. |
719 | PPP terminated by remote machine. |
720 | No PPP control protocols configured. |
721 | Remote PPP peer is not responding. |
722 | The PPP packet is invalid. |
723 | The phone number, including prefix and suffix, is too long. |
724 | The IPX protocol cannot dial-out on the port because the computer is an IPX router. |
725 | The IPX protocol cannot dial-in on the port because the IPX router is not installed.. |
726 | The IPX protocol cannot be used for dial-out on more than one port at a time. |
727 | Cannot access TCPCFG.DLL. |
728 | Cannot find an IP adapter bound to Remote Access. |
729 | SLIP cannot be used unless the IP protocol is installed. |
730 | Computer registration is not complete. |
731 | The protocol is not configured. |
732 | The PPP negotiation is not converging. |
733 | The PPP control protocol for this network protocol is not available on the server. |
734 | The PPP link control protocol terminated.. |
735 | The requested address was rejected by the server.. |
736 | The remote computer terminated the control protocol. |
737 | Loopback detected.. |
738 | The server did not assign an address. |
739 | The remote server cannot use the Windows NT encrypted password. |
740 | The TAPI devices configured for Remote Access failed to initialize or were not installed correctly. |
741 | The local computer does not support encryption. |
742 | The remote server does not support encryption. |
743 | The remote server requires encryption. |
744 | Cannot use the IPX net number assigned by the remote server. Check the event log. |
752 | A syntax error was encountered while processing a script. |
777 | The connection attempt failed because the modem (or other connecting device) on the remote computer is out of order. |
797 | The modem could not be found. This is normally down to the incorrect driver being installed. This only happens in Windows 2000™ and XP™ |
